These
VIP Series Bleachers With Chain Link Fence are perfect for outdoor auxiliary
seating requirements. Frame work is welded aluminum angle. Seat planks are
2" x 10”w anodized aluminum so there is no discoloring. These bleachers
feature double foot planks that measure 2" x 10” each and are made of mill finished aluminum.
Risers on every row. Bleachers on this page come with fence railing
standard on the upper rows to meet requirements of NFPA & the Consumer Products
Safety Commission standards. Models with aisles have full 4.5' wide aisles
with aluminum hand rails. 5 year manufacturers limited warranty.
Allow 3 to 4 weeks for delivery.
Our manufacturer builds bleachers to the highest standards.
Listed below are some of the differences by others who may be listing their
bleachers as comparable to theirs.
1. Frames - 100% aluminum angle. Be careful of
those quoting “galvanized, steel angle iron” as equal.
2. Seat Planks - 100% anodized aluminum with a
minimum wall thickness of .078. A thinner walled unit does not have the strength
or support. Be careful of anyone offering powder coated steel planks which will
rust out when powder coating wears off.
3. Foot Planks - 100% Mill Finish Aluminum. Be
careful of those quoting steel foot planks. They could rust out & will
need to be replaced.
4. End Caps - constructed of fiber reinforced
polypropylene. There are no holes to drill to complete installation. No sharp
edges to snag clothing or skin.
